The effects of hurricanes, winds, and rains are felt long after the disaster. Tree damage is one of the most noticeable examples of this. Even healthy trees are sometimes unable to sustain the damage nature can do. Thankfully, bracing a tree can help trees to survive harsh weather. Also, tree bracing encourages healthy and straight growth.
Keep reading to learn how to do tree bracing and why is it good for your trees!
Related Post: Tree Cabling
Bracing a Tree – How Does it Work?
What is tree cabling and bracing?
Tree services Plano are bracing trees to add structural support to them and to protect the trees from damage. The process involves adding strong braces to a tree that helps to prevent possible failure or damage, usually in the event of bad weather.
The tree bracing process involves adding flexible steel cables between trunks or branches of a tree. Then, tree experts connect them between bolts or bracing rods attached to a tree. The risk is further minimized by removing dead branches as they are very vulnerable during a storm.
By doing this, we offer additional support to any weak spots and we reduce the movement of any healthy trunks and branches. In times of heavy rains and heavy winds, it is very important to limit how much stress a tree will face.
Sometimes, the only option is to completely remove the tree or a limb. For example, this is the case when a branch is excessively week or has been damaged beyond restoration. Consider whether the safety risk is eliminated before you proceed to bracing. The cost factor may also lead to removing a tree sometimes. Consider removal if it costs less to replace a tree than to brace it.
As already mentioned above, bracing makes the tree much less susceptible to damage by providing structural support to various parts of a tree. For example, branches are less likely to snap off since they cannot move as freely as they did before. This reduces the fractures and stresses caused by high winds.
All of these provide numerous safety benefits during storms, and especially hurricanes. In fact, Hurricane Harvey was responsible for hundreds of deaths of trees. The damage was so excessive that only trees that went through the bracing process had a chance to survive.
You should keep in mind that certain types of trees are more susceptible to damage from bad weather than others. Trees that are prone to multiple trunks and those with open canopies have a greater chance of being damaged. Texas red oak, Arizona Ash, and Shumard red oak are just a few examples of trees that can be damaged easily.
Don’t hesitate to hire a tree service Texas company to help you with your trees. The bracing process can sometimes be complicated, so make sure you follow the safest standards your local arborists can provide. Once you’re done with bracing, your tree should be able to pass a tree inspection.
Tree inspections are about determining the risks and structural weaknesses of a tree. Your local arborist can help you prepare your tree for inspection and secure your tree as best as you can.
Local Tree Experts Overview
In order to keep your trees safe during adverse weather, bracing a tree can be extremely helpful. The process of bracing can be a bit complicated, so it is recommended to hire your local arborist to get adequate help. With proper bracing, your trees will acquire structural support and will be able to withstand harsh weather. Calculate whether complete removal of a tree or a limb would be more cost-efficient than bracing.